wtw7500gc0 whirlpool washing machine manual

The Whirlpool WTW7500GC0 is a high-efficiency top-load washing machine with advanced features including multiple wash cycles, temperature settings, soil levels, and smart technology for optimal cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Advanced washing system, Control Panel, Lid, Agitator, Water Inlet Valves, Drain Pump, and Leveling Legs.

Feature	Description
Wash Cycles	Normal, Heavy, Delicates, Quick Wash, Bulky Items
Temperature Settings	Hot, Warm, Cold, Tap Cold
Soil Levels	Light, Normal, Heavy, Extra Heavy
Spin Speeds	High, Medium, Low, No Spin
Control Lock	Prevents accidental changes during cycle
Delay Start	Set wash cycle to start later
Deep Water Wash	Extra water for heavily soiled loads
Signal Volume	Adjustable end-of-cycle signal
Stain Treat Option	Pre-treat stains before washing
Smart Dispense	Automatically dispenses detergent

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Remove all bolts and packing materials from drum.
Level the washer: Adjust leveling legs until machine is stable and doesn't rock.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Secure drain hose to standpipe or laundry tub.
Plug into electrical outlet: Use grounded 120V outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure and leak-free.

First-Time Setup

Before first use, run a cleaning cycle.

Check installation: Verify washer is level and all connections are tight.
Run initial cycle: Select Clean Washer cycle with hot water and no clothes.
Set preferences: Adjust default settings like signal volume and control lock.
Load detergent: Fill detergent dispenser according to manufacturer instructions.

CAUTION! Do not use washer until properly installed and leveled.

Specifications

Capacity: 4.8 cubic feet
Color: Chrome Shadow
Control Type: Electronic with LED display
Water Connection: Hot and Cold water required
Voltage: 120V, 60Hz
Amperage: 15A
Dimensions: 28" W x 28" D x 43" H
Weight: 150 lbs
Warranty: 1-year full, 10-year limited on transmission

Controls and Settings

Control Panel: POWER, CYCLE KNOB, TEMPERATURE, SPIN SPEED, SOIL LEVEL, OPTIONS buttons, START/PAUSE.

Cycle Selection: Turn knob to select desired wash cycle. Temperature: Choose water temperature for wash and rinse. Spin Speed: Adjust final spin speed. Soil Level: Match to soil level of clothes. Options: Deep Water, Pre-Soak, Extra Rinse, Delay Start.

Settings: Control Lock, Signal Volume, Default Settings can be adjusted in settings menu.

Connecting Utilities

Water Supply: Hot and cold water connections required. Drain: Standpipe or laundry tub connection.

Turn off water supply before connecting hoses.
Use only new hoses; do not reuse old hoses.
Ensure drain hose is secured and not kinked.
Plug into grounded electrical outlet.

Tip: Check for leaks after initial connection and first few cycles.

Operating the Washer

Follow these steps for proper operation.

Load clothes: Do not overload; leave space for clothes to move freely.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Turn knob to desired wash cycle.
Adjust settings: Set temperature, spin speed, and soil level as needed.
Add options: Select any additional features like Deep Water or Extra Rinse.
Start cycle: Press START/PAUSE to begin washing.
Monitor progress: LED display shows time remaining and current cycle stage.
Remove clothes: Promptly remove clothes when cycle completes to prevent wrinkles.

WARNING! Do not open lid during spin cycle. Keep children away from operating washer.

Special Features

Deep Water Wash: Provides extra water for heavily soiled loads. Pre-Soak: Soaks clothes before washing cycle. Extra Rinse: Adds additional rinse cycle. Delay Start: Sets washer to start up to 24 hours later. Control Lock: Prevents accidental changes to settings.

Care & Cleaning

Regular maintenance ensures optimal performance.

Clean exterior: Wipe with damp cloth; do not use abrasive cleaners.
Clean interior: Run Clean Washer cycle monthly with washer cleaner.
Clean dispensers: Remove and clean detergent and fabric softener dispensers.
Check hoses: Inspect water hoses annually for wear or leaks.

CAUTION! Unplug washer before cleaning. Do not use harsh chemicals.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Check power cord; ensure lid is closed; press START firmly.
No water filling	Water supply	Check water valves are on; inspect hoses for kinks.
Water won't drain	Drain hose	Check for clogs; ensure drain hose is not kinked.
Excessive vibration	Leveling/load	Re-level washer; redistribute load evenly.
Leaking water	Connections/hoses	Tighten connections; replace damaged hoses.
Error codes displayed	Various issues	Refer to error code chart in manual; reset washer.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-253-1301; www.whirlpool.com