Whirlpool WFW5605MW0 Service Manual

The Whirlpool WFW5605MW0 is a front-load washing machine with 4.5 cubic feet capacity, ENERGY STAR certified, featuring AccuWash system, 14 wash cycles, 5 temperature settings, stainless steel drum, LED display, and advanced moisture sensing technology. Below are key sections for safety, technical specifications, installation, operation, maintenance, troubleshooting, and service procedures.

1. Technical Specifications 2. Installation Instructions 3. Control Panel Overview 4. Operating Instructions 5. Maintenance Procedures 6. Error Codes 7. Troubleshooting Guide 8. Parts List 9. Wiring Diagrams 10. Disassembly Instructions 11. Safety Information

Technical Specifications

Key technical details and performance specifications for the WFW5605MW0 model.

Specification	Details
Capacity	4.5 cubic feet
Dimensions	27" W x 38.5" H x 31.5" D
Voltage	120V AC, 60Hz
Current	15 Amps
Water Pressure	20-120 psi
Weight	205 lbs
Motor Type	Direct Drive
Spin Speed	Up to 1300 RPM
Energy Rating	ENERGY STAR Certified
Warranty	10-year motor warranty

Installation Instructions

Proper installation procedures for optimal performance and safety.

Unpack and inspect all components for damage during shipping.
Remove shipping bolts and retain for future use.
Level the machine using adjustable feet on uneven surfaces.
Connect water supply hoses to hot and cold water faucets.
Install drain hose properly to prevent siphoning.
Plug into dedicated 120V grounded outlet.

WARNING! Do not remove shipping bolts until machine is in final position. Ensure proper leveling to prevent vibration.

Control Panel Overview

Detailed description of control panel functions and settings.

Control	Function
POWER	Turns machine on/off
CYCLE KNOB	Selects from 14 wash cycles
TEMPERATURE	5 temperature settings (Cold, Warm, Hot, etc.)
SPIN SPEED	Adjusts final spin speed
OPTIONS	Extra rinse, pre-wash, deep water wash
START/PAUSE	Initiates or pauses cycle
LED DISPLAY	Shows cycle time, error codes, settings

Operating Instructions

Step-by-step guide for proper machine operation.

Sort laundry by color and fabric type.
Load items loosely without overfilling drum.
Add detergent to appropriate dispenser.
Select desired cycle and options.
Press START to begin cycle.
Clean lint filter after each use.

CAUTION! Do not exceed maximum load capacity. Use only HE (High Efficiency) detergent.

Maintenance Procedures

Regular maintenance schedule and procedures.

Daily: Wipe control panel and door seal
Weekly: Clean detergent dispenser
Monthly: Run cleaning cycle with affresh tablets
Quarterly: Inspect and clean drain pump filter
Annually: Check hoses for wear and replace if necessary

Error Codes

Common error codes and their meanings.

Error Code	Description	Action Required
F1	Water supply issue	Check water valves and pressure
F2	Drain problem	Clear drain hose and filter
F3	Motor control fault	Check motor and control board
F5	Door lock failure	Inspect door lock mechanism
F7	Temperature sensor error	Replace temperature sensor

Troubleshooting Guide

Common problems and solutions for the WFW5605MW0.

Symptom	Possible Cause	Corrective Action
Machine won't start	Power issue, door not closed	Check power supply, ensure door latched
No water filling	Water valves closed, kinked hoses	Open valves, straighten hoses
Excessive vibration	Uneven floor, shipping bolts not removed	Level machine, remove shipping bolts
Water not draining	Clogged filter, drain hose blockage	Clean drain pump filter, check hose
Leaking water	Loose connections, damaged hoses	Tighten connections, replace hoses

Parts List

Common replacement parts for service and repair.

WPW10327476 - Drive Motor
WPW10727472 - Control Board
WPW10227470 - Door Lock Assembly
WPW10127469 - Water Inlet Valve
WPW10527471 - Drain Pump
WPW10927475 - Temperature Sensor
WPW10427473 - Door Boot Seal

Wiring Diagrams

Electrical schematics for troubleshooting electrical issues.

Main Components: Control board, motor, sensors, door lock, water valves, drain pump.

Safety: Always disconnect power before servicing electrical components.

Testing: Use multimeter to verify voltage and continuity.

Disassembly Instructions

Step-by-step disassembly for component access and replacement.

Disconnect power and water supply.
Remove top panel by releasing front clips.
Remove control panel screws and disconnect wiring.
Access door lock and boot seal from front.
Remove rear panel for motor and pump access.
Follow reverse order for reassembly.

WARNING! Document wire connections and take photos during disassembly.

Safety Information

Important safety precautions for service technicians.

Always disconnect power before servicing
Use proper lifting techniques - machine weighs 205 lbs
Wear safety glasses during disassembly
Follow lockout/tagout procedures
Discharge capacitors before working on control board
Use only Whirlpool genuine replacement parts

Service Support: 1-800-253-1301; www.whirlpool.com/service