Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Choose Installation Location: Select a level, solid floor location near water supply and electrical outlet with proper clearance.
- Remove Shipping Materials: Remove all transit bolts and packaging materials from the washer drum and exterior.
- Connect Water Supply: Connect hot and cold water supply lines using new hoses with rubber washers. Hand tighten plus 2/3 turn.
- Connect Drain Hose: Install drain hose into standpipe or laundry sink with proper height (minimum 39 inches, maximum 96 inches).
- Electrical Connection: Connect to dedicated 120V, 60Hz grounded outlet. Do not use extension cords or adapters.
- Level the Washer: Adjust all four leveling legs to ensure washer is perfectly level. Check with spirit level.
- Initial Test Run: Run empty rinse and spin cycle to verify proper installation and check for leaks.
Specifications
| Model Series | WTW4850HW / WTW4950HW |
| Type | Top Load Electric Washer |
| Color | White / Chrome |
| Capacity | 4.8 cu. ft. Super Capacity Plus |
| Noise Level | 68 dB (Operating) |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STARĀ® Certified |
| Water Consumption | 13.5 gallons per cycle (average) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 43.5 x 27 x 28.5 inches |
| Weight | 165 lbs |
| Agitator Type | Dual Action Impeller |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive System Warranty: 10 years on motor and transmission
- Tub Warranty: Lifetime on stainless steel tub
- Additional Coverage: Optional 5-year extended warranty
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Super Capacity Plus
4.8 cubic foot capacity allows for larger loads and bulky items like comforters and blankets, reducing the number of loads needed.
Dual Action Impeller
Advanced wash system with two different motion patterns that work together to provide thorough cleaning while being gentle on fabrics.
ENERGY STARĀ® Certified
Meets strict energy efficiency guidelines set by the EPA, using less energy and water than conventional washers.
Quick Wash Cycle
30-minute cycle for lightly soiled loads, providing fast cleaning when you're in a hurry without sacrificing cleaning performance.
Deep Water Wash Option
Allows you to add more water for heavily soiled items or when you want the maximum cleaning power for tough stains.
Stainless Steel Wash Basket
Durable, rust-resistant stainless steel basket provides long-lasting performance and gentle care for your clothes.
Wash Cycle Options
Normal
For regularly soiled cotton and mixed fabric loads with warm or hot water
Heavy
For heavily soiled items and sturdy fabrics with extended wash time
Delicates
Gentle cycle for delicate fabrics, lingerie, and hand-washable items
Quick Wash
30-minute cycle for lightly soiled loads when you need clothes fast
Bulky Items
Special cycle for bedding, comforters, and other large items
Rinse & Spin
Additional rinse cycles or spin only for hand-washed items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start or run | Power cord not plugged in, lid not closed, circuit breaker tripped | Check power connection, ensure lid is closed, reset circuit breaker |
| Poor cleaning performance | Overloading, incorrect detergent, wrong cycle selection | Reduce load size, use HE detergent, select proper cycle |
| Water won't drain | Drain hose clogged or kinked, drain pump filter blocked | Check drain hose, clean drain pump filter |
| Water leakage | Loose hose connections, over-sudsing, damaged tub seal | Tighten connections, use less detergent, check tub seal |
| Loud noises during operation | Foreign objects in drum, unbalanced load, worn bearings | Remove objects, redistribute load, check for worn parts |
| Excessive vibration | Unlevel installation, shipping bolts not removed, overloaded | Level the washer, remove shipping bolts, reduce load size |
Error Codes
- F1: Water fill time exceeded - Check water supply and inlet valve
- F2: Drain time exceeded - Check drain hose and pump
- F3: Water temperature issue - Check hot/cold water supply
- F5: Lid lock malfunction - Check lid switch and lock mechanism
- F7: Motor control issue - Unplug for 5 minutes, then retry
- F8: Spin speed error - Redistribute load and restart cycle
Manual Downloads
Current Model Manuals
WTW4850HW
Super Capacity Plus 465 Electric
WTW4950HW
Super Capacity Plus with Steam
WTW5050HW
5.3 cu. ft. Capacity Electric
WTW4815HW
Super Capacity 465 White
Popular Previous Models
WTW4800HQ
Super Capacity 465 Quick Wash
WTW4700HW
4.3 cu. ft. Capacity Electric
WTW4610HW
Super Capacity Plus 440
WTW4500HW
4.0 cu. ft. Capacity Electric