Whirlpool Model WEG745H0FS0 Manual

The Whirlpool WEG745H0FS0 is a 4.8 cubic foot capacity electric dryer with advanced moisture sensing technology, multiple dry cycles including Normal, Heavy, Delicates, Quick Dry, and Air Fluff, wrinkle care option, end of cycle signal, and stainless steel drum. Powered by 240V AC, 30A. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Venting Requirements 7. Operating Instructions 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, electronic controls, moisture sensor, lint filter, door with window, and multiple drying cycles.

Feature	Description
Capacity	4.8 cubic feet stainless steel drum
Moisture Sensing	Automatically detects dryness level
Dry Cycles	Normal, Heavy, Delicates, Quick Dry, Air Fluff
Wrinkle Care	Tumble without heat after cycle ends
End of Cycle Signal	Audible alert when drying complete
Lint Filter	Easy-clean removable filter
Door Reversal	Optional left or right door opening
Power Requirements	240V AC, 30A dedicated circuit
Control Lock	Prevents accidental changes
Temperature Settings	High, Medium, Low, No Heat

Installation

Unpack and inspect contents. Place on level surface.

Electrical connection: Requires 240V, 30A dedicated circuit with proper grounding.
Venting: Install 4-inch diameter rigid metal ducting to exterior.
Leveling: Adjust leveling legs to ensure unit is stable and level.
Gas connection (if applicable): For gas models, connect to proper gas supply line.
Final check: Ensure all connections are secure before operation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper electrical connection by qualified electrician.

First-Time Setup

Complete installation and prepare for first use.

Remove shipping materials: Check for and remove all packing materials.
Level the dryer: Adjust feet until unit is stable and doesn't rock.
Connect power: Plug into dedicated 240V outlet.
Test operation: Run empty on Air Fluff cycle to ensure proper operation.
Clean lint filter: Ensure filter is clean before first load.

CAUTION! Do not operate without proper venting installed. Keep area around dryer clear of combustible materials.

Specifications

Model: WEG745H0FS0
Capacity: 4.8 cubic feet
Drum Material: Stainless steel
Power Source: 240V AC, 30A
Control Type: Electronic with LED display
Dry Cycles: Normal, Heavy, Delicates, Quick Dry, Air Fluff
Temperature Settings: High, Medium, Low, No Heat
Moisture Sensing: Yes
Wrinkle Care: Yes
Dimensions: 27" W x 29" D x 38" H
Weight: 125 lbs

Controls and Settings

Electronic control panel with cycle selection, temperature settings, and options.

Control Panel: POWER, CYCLE SELECTOR, TEMPERATURE, START/PAUSE, OPTIONS (Wrinkle Care, Signal, Control Lock).

Cycle Selection: Turn dial to select desired drying cycle. Temperature: Choose High, Medium, Low, or No Heat based on fabric type. Options: Wrinkle Care continues tumbling after cycle ends; End of Cycle Signal provides audible alert; Control Lock prevents accidental changes.

Venting Requirements

Proper venting is essential for safe and efficient operation.

Use rigid metal ducting (4-inch diameter) - do not use plastic or foil.
Keep vent run as short and straight as possible.
Ensure exterior vent hood operates freely.
Clean lint from venting system regularly.
Check that airflow is strong at exterior vent.

Tip: Clean lint filter after every load to maintain efficiency and safety.

Operating Instructions

Follow these steps for proper dryer operation.

Load laundry: Do not overload - leave room for clothes to tumble freely.
Select cycle: Choose appropriate cycle for fabric type.
Set temperature: Select heat setting based on fabric care labels.
Add options: Select Wrinkle Care or Signal if desired.
Start dryer: Press START button.
Monitor progress: Display shows remaining time.
Remove promptly: Take clothes out when cycle ends to prevent wrinkles.
Clean filter: Remove lint from filter after every load.

WARNING! Do not dry items containing foam, rubber, or plastic. Do not use dryer if lint filter is missing or damaged.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Daily: Clean lint filter after every load. Monthly: Check and clean venting system. Quarterly: Wipe interior drum and door seal. Annually: Have professional service check electrical connections and internal components.

CAUTION! Unplug dryer before cleaning interior. Do not use abrasive cleaners on surfaces.

Regulatory Information

UL listed; meets applicable safety standards. Energy Star certified for energy efficiency. Manufactured by Whirlpool Corporation. For support, visit www.whirlpool.com or contact 1-800-253-1301. Serial number located on door frame. Model number WEG745H0FS0.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check power connection; ensure door is fully closed.
Clothes not drying	Lint/venting	Clean lint filter; check venting for restrictions.
No heat	Heating element	Check circuit breaker; may need heating element replacement.
Unusual noise	Objects/rollers	Check for objects in drum; may need roller replacement.
Error codes	Various issues	Refer to specific error code in manual; reset if needed.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-253-1301; www.whirlpool.com