Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Gas leak detector solution
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and adequate clearance from combustible materials.
- Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the range.
- Gas Connection (Gas Models): Connect gas supply line using approved flexible connector. Apply pipe joint compound to all threaded connections.
- Electrical Connection (Electric Models): Connect to properly grounded 240V, 60Hz outlet. Ensure circuit breaker is appropriate for range requirements.
- Anti-Tip Bracket Installation: Install and secure anti-tip bracket to floor or wall according to instructions to prevent tipping.
- Level the Range: Adjust leveling legs to ensure range is level from front to back and side to side.
- Leak Test (Gas Models): Test all gas connections for leaks using leak detector solution. Do not use open flame.
- Test Operation: Test all burners, oven functions, and controls to ensure proper operation.
Specifications
| Model Series | WGG535S0FS / WGE535S0FS |
| Type | Freestanding Gas & Electric Range |
| Color | Stainless Steel / Fingerprint Resistant |
| Burner Configuration | 5 Sealed Burners (Gas) / 5 Heating Elements (Electric) |
| Oven Capacity | 5.3 cu. ft. |
| Control Type | Touch Controls with LED Display |
| Energy Rating | Energy Star Certified |
| Power Requirements (Electric) | 240V, 60Hz, 40A |
| Gas Requirements | Natural Gas or LP (conversion kit required) |
| Dimensions (HxWxD) | 47 x 30 x 28 inches |
| Weight | 145 lbs (Gas) / 165 lbs (Electric) |
| Warranty | 1 Year Full Warranty |
Burner Specifications
- Power Burner: 18,000 BTU (Gas) / 3,000W (Electric)
- Standard Burners: 9,500 BTU (Gas) / 2,000W (Electric)
- Simmer Burner: 5,000 BTU (Gas) / 1,200W (Electric)
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Warranty: 5 years on sealed burners
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Precise Simmer Burner
Specialized low-temperature burner perfect for delicate sauces, melting chocolate, and keeping food warm without burning.
Power Burner
High-output burner delivers maximum heat for fast boiling and searing, reducing cooking time for large pots and pans.
Fingerprint Resistant Stainless Steel
Advanced coating technology resists fingerprints and smudges, keeping your range looking clean with minimal maintenance.
Even Baking Technology
Precision temperature control and optimal heat distribution ensure consistent baking results with no hot spots.
Easy-Clean Surface
Spillover cooktop design contains spills for easy cleanup, while sealed burners prevent food particles from falling below.
Frozen Bake Technology
Special setting allows you to bake frozen foods without preheating, saving time and energy while delivering perfect results.
Cooking Modes Explained
Convection Bake
Circulates heated air for faster, more even baking with multiple racks
Convection Roast
Perfect for roasting meats and vegetables with crispy exterior and juicy interior
Proof
Maintains ideal temperature for proofing bread dough and other yeast products
Warm
Keeps cooked foods at serving temperature without continuing to cook
Self Clean
High-temperature cleaning cycle that turns food soil to ash for easy wipe-up
Delay Start
Program oven to start and stop cooking at preset times for meal planning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't light (Gas) | Gas supply off, clogged burner ports, faulty igniter | Check gas supply, clean burner ports, check igniter operation |
| Element won't heat (Electric) | Faulty element, poor connection, control issue | Check element continuity, ensure proper connection, test controls |
| Oven temperature inaccurate | Calibration needed, faulty sensor, door seal issue | Recalibrate oven temperature, check sensor, inspect door seal |
| Uneven cooking | Rack position incorrect, oven not level, door not sealing | Adjust rack position, level range, check door alignment |
| Display error codes | Control board issue, sensor failure, power interruption | Reset power, check error code meaning, contact service |
| Self-clean not working | Door not locked, faulty lock mechanism, control issue | Ensure door locks properly, check lock mechanism, reset controls |
Error Codes
- F1: Oven temperature sensor failure - Check sensor connection
- F2: Oven over-temperature - Allow to cool, check ventilation
- F3: Oven door lock failure - Check lock mechanism and switch
- F4: Control board communication error - Reset power
- F5: Keypad error - Clean keypad, check connections
- F7: Display board failure - Contact service center
Manual Downloads
Current Gold Series Models
WGG535S0FS
30" Gas Range
WGE535S0FS
30" Electric Range
WGG745S0FS
30" Gas Range with Air Fry
WGE745S0FS
30" Electric Range with Air Fry
Popular Previous Models
WGG505S0FS
30" Gas Range
WGE505S0FS
30" Electric Range
WGG560S0FS
30" Gas Range with Steam
WGE560S0FS
30" Electric Range with Steam