Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Tape measure
- Pipe wrench
- Gas leak detector solution
Step-by-Step Installation
- Choose Installation Location: Select a location with proper clearance from combustible materials and adequate ventilation.
- Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the oven.
- Gas Connection: Connect to gas supply using approved flexible gas connector. Apply pipe joint compound to all threaded connections.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Ensure proper polarization.
- Anti-tip Bracket Installation: Install and secure the anti-tip bracket to the floor or wall as specified in instructions.
- Level the Range: Adjust the leveling legs to ensure the range is level from front to back and side to side.
- Leak Test: Test all gas connections for leaks using leak detector solution. Do not use open flame.
- Initial Burn-off: Operate all surface burners and oven for 15 minutes to burn off manufacturing residues.
Specifications
| Model Series | WGG745SFBS |
| Type | Freestanding Gas Range |
| Color | Stainless Steel / Black |
| Oven Capacity | 5.8 cu. ft. |
| Surface Burners | 5 Sealed Burners (1 UltraPower, 1 PowerSimmer) |
| Control Type | Knob Controls with Digital Display |
| Energy Rating | Energy Star Certified |
| Gas Type | Natural Gas or LP (conversion kit required) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 47 x 30 x 29 inches |
| Weight | 185 lbs |
| Self-Clean Cycle | 3-hour high heat cleaning |
Warranty Information
- Full Warranty: 1 year parts and labor
- Oven Cavity Warranty: 5 years on porcelain enamel
- Burner Warranty: 10 years on sealed burners
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Self-Cleaning Oven
The high-temperature self-cleaning cycle eliminates the need for chemical cleaners by reducing food soil to a fine ash that can be easily wiped away.
Fingerprint Resistant Stainless Steel
Special coating on stainless steel surfaces resists fingerprints and smudges, making cleanup quick and easy while maintaining the premium appearance.
Precise Simmer Burner
The exclusive PowerSimmer burner provides precise low-temperature control for delicate sauces, melting chocolate, and keeping foods warm without burning.
Even Baking Technology
Advanced heating elements and air circulation system ensure even temperature distribution throughout the oven cavity for consistent baking results.
Convection Cooking
The true European convection system with a third heating element and fan circulates heated air evenly around food for faster, more even cooking.
StorAbility® Roll-Out Rack
The full-extension roll-out rack provides easy access to the back of the oven and can be stored underneath when not in use for added convenience.
Self-Cleaning Operation
Preparation
Remove all racks and accessories. Wipe up heavy spills before starting cycle.
Locking
Door automatically locks during cleaning cycle for safety. Cannot be opened until cool.
Cleaning
3-hour cycle heats to 880°F to burn off food residue. Kitchen ventilation recommended.
Cool Down
Extended cool-down period allows oven to return to safe temperature gradually.
Clean Up
Wipe away fine ash residue with damp cloth once oven has completely cooled.
Rack Cleaning
Clean racks separately using mild detergent and warm water. Do not self-clean racks.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Oven won't heat | Power issue, gas supply off, control lock activated | Check power supply, ensure gas valve is on, check control lock |
| Uneven baking | Rack position incorrect, oven not preheated | Use correct rack position, always preheat oven completely |
| Self-clean won't start | Door not closed properly, control lock engaged | Ensure door is fully closed, check control lock settings |
| Gas odor | Normal during initial use, possible leak | Air out during initial use, check for leaks with detector solution |
| Burner won't light | Power outage, clogged ports, misaligned cap | Check power, clean burner ports, ensure cap is properly aligned |
| Error codes displayed | Electronic control issue, sensor failure | Disconnect power for 5 minutes, if persists contact service |
Error Codes
- F1: Oven temperature sensor issue - Check sensor connection
- F2: Oven over-temperature - Allow oven to cool completely
- F3/F4: Electronic oven control failure - Reset power, contact service
- F5: Electronic control communication error - Reset power supply
- F7: Oven temperature too high during self-clean - Check ventilation
- F8: Shorted key - Clean control panel, check for moisture
Manual Downloads
Current Model Manuals
WGG745SFBS
30" Gas Range with Self-Clean
WGE745C0FS
30" Electric Range with Self-Clean
WGG745S0FS
30" Gas Range with Air Fry
WGG745S0JS
30" Gas Range with Steam Clean
Popular Previous Models
WGG53SOFVS
30" Gas Range with Convection
WGE743C0FS
30" Electric Range with True Convection
WGG541SMBS
30" Gas Range with Steam Clean
WGG505SWBS
30" Gas Range with Quick Preheat