Whirlpool Dryer WED7500GW Manual

The Whirlpool WED7500GW is a 7.4 cu. ft. capacity electric dryer with Advanced Moisture Sensing technology, Wrinkle Shield option, AccuDry temperature management, steam refresh cycle, and multiple drying cycles. Features include stainless steel drum, electronic controls, end-of-cycle signal, and ENERGY STAR certification. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, stainless steel drum, lint filter, steam nozzle, moisture sensors, and multiple drying cycles.

Installation

Unpack and inspect contents. Place on level floor near laundry area.

1. Electrical connection: Requires 240V outlet; hire qualified electrician if needed.
2. Venting: Install 4-inch diameter metal vent duct to outdoors.
3. Leveling: Adjust leveling legs for stability; use bubble level.
4. Gas connection (if applicable): For gas models, connect gas line with shut-off valve.

WARNING! Dryer is heavy; use two people for moving. Ensure proper electrical grounding.

First-Time Setup

Connect power and follow initial setup steps.

1. Check installation: Verify leveling and vent connection.
2. Power on: Plug into 240V outlet; control panel will illuminate.
3. Test run: Run empty on AIR FLUFF cycle to remove shipping materials.
4. Set preferences: Configure end signal volume and display settings.

CAUTION! Do not operate without proper venting. Keep area around dryer clear.

Specifications

• Capacity: 7.4 cu. ft. stainless steel drum.
• Power Source: 240V AC, 60Hz electric.
• Controls: Electronic touch panel with LED display.
• Drying Technology: Advanced Moisture Sensing, AccuDry temperature control.
• Steam Function: Steam refresh cycle available.
• Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff, Steam Refresh.
• Options: Wrinkle Shield, Signal, End of Cycle.
• Dimensions: Standard dryer dimensions for stacking.
• Weight: Approximately 130 lbs.

Controls and Settings

Electronic control panel with cycle selection, options, and start/pause.

Main Controls: POWER, CYCLE SELECTOR, OPTIONS, START/PAUSE, STEAM.

Cycle Selection: Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff, Steam Refresh. Options: Wrinkle Shield (tumbles without heat after cycle), Signal (volume control), Dryness Level (Auto Dry, Timed Dry). Steam: Steam Refresh for odor removal and wrinkle reduction. Settings: Language, display brightness, end signal volume.

Cycle Selection

Select appropriate cycle for load type and fabric.

1. Normal: Everyday items like cotton, linens.
2. Heavy Duty: Bulky items like towels, jeans.
3. Delicates: Gentle drying for sensitive fabrics.
4. Quick Dry: Small loads needing fast drying.
5. Air Fluff: No heat for fluffing pillows, drapes.
6. Steam Refresh: Reduces wrinkles and odors.

Tip: Use Auto Dry with moisture sensing for optimal drying results.

Steam Features

Steam Refresh cycle for wrinkle reduction and odor removal.

1. Select Steam Refresh cycle.
2. Load up to 3 items for best results.
3. Add 8 oz. water to reservoir if prompted.
4. Start cycle; takes approximately 20 minutes.
5. Remove items immediately after cycle completion.

WARNING! Do not use steam with plastic, rubber, or heat-sensitive items.

Care & Maintenance

Regular maintenance ensures optimal performance and safety.

1. Clean lint filter before every load.
2. Monthly: Check and clean vent duct.
3. Quarterly: Wipe drum interior with damp cloth.
4. Annually: Inspect electrical connections and venting.

CAUTION! Unplug before cleaning. Never operate without lint filter.

Regulatory Information

UL listed; complies with FCC Part 15. ENERGY STAR certified. Copyright © Whirlpool Corporation. All rights reserved. For support, visit www.whirlpool.com or contact 1-800-253-1301.

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-253-1301; www.whirlpool.com