Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and adequate clearance on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Gas Connection (Gas Models): Connect gas line using approved flexible connector. Check for leaks with soap solution.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz outlet for electric models or 120V for gas models ignition circuit.
- Ventilation System: Install 4-inch diameter rigid metal ducting to exterior vent hood. Avoid plastic or foil ducts.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | WED9620HW |
| Type | Electric/Gas Dryer |
| Color | White / Stainless Steel |
| Capacity | 7.0 cu. ft |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements (Electric) | 240V, 60Hz, 30A |
| Power Requirements (Gas) | 120V, 60Hz, 15A (Ignition Circuit) |
| Dimensions (HxWxD) | 43 x 76 x 76 cm |
| Weight | 61 kg |
| Vent Requirements | 4-inch diameter rigid metal duct |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on dryer motor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Advanced Moisture Sensing
Automatically detects moisture levels and adjusts drying time accordingly, preventing over-drying and saving energy while protecting your clothes.
Wrinkle Shield™ Option
After the cycle completes, the dryer periodically tumbles the load without heat to help prevent wrinkles from setting in for up to 120 minutes.
Steam Refresh Cycle
Uses steam to reduce wrinkles and odors in lightly worn clothes, refreshing them without a full wash cycle and saving time and water.
AccuDry™ Temperature Management
Monitors temperature throughout the cycle to ensure consistent drying performance while protecting fabrics from excessive heat damage.
Large Capacity Drum
7.0 cubic foot capacity allows you to dry larger loads, including bulky items like comforters and blankets, with optimal air circulation.
Quick Dry Cycle
Special cycle designed to dry small loads quickly, perfect for when you need specific items dried in a hurry without running a full cycle.
Drying Cycles Explained
Auto Dry
Automatically senses moisture and stops when clothes are dry using the selected dryness level
Timed Dry
Manual drying for a specific amount of time from 10 to 180 minutes
Wrinkle Control
Uses steam and tumbling action to reduce wrinkles in dry clothes
Delicates
Gentle cycle with low heat for delicate fabrics and special care items
Heavy Duty
High heat setting for heavily soiled items and maximum drying power
Air Fluff
No heat cycle that uses room temperature air to fluff pillows and freshen items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched completely, press and hold start button for 3 seconds |
| Clothes not drying | Lint filter clogged, vent system blocked, overloaded | Clean lint filter, check vent system for obstructions, reduce load size |
| Dryer is noisy | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, inspect drum rollers and bearings for wear |
| Dryer overheats | Ventilation blocked, thermostat failure | Clean vent system, check cycling thermostat |
| Gas odor (Gas models) | Gas leak, improper combustion | Immediately turn off gas supply and contact qualified technician |
| Error codes displayed | Sensor issues, control board problems | Refer to error code chart, reset dryer, contact service if persistent |
Error Codes
- F1: Control failure - Unplug dryer for 5 minutes, then restart
- F2: Motor circuit fault - Check for obstruction, reset dryer
- F3: Thermistor issue - Check temperature sensor, contact service
- F5: Door switch failure - Ensure door closes properly, check switch
- F7: Heater circuit fault - Check heating element, thermal fuse
- F8: Moisture sensor error - Clean moisture sensor bars
Manual Downloads
Current Model Manuals
WED9620HW
7.0 cu. ft Electric Dryer
WGD9620HW
7.0 cu. ft Gas Dryer
WED9610HW
7.0 cu. ft Steam Dryer
WGD9610HW
7.0 cu. ft Steam Gas Dryer
Popular Previous Models
WED8500DW
7.4 cu. ft Electric Dryer
WGD8500DW
7.4 cu. ft Gas Dryer
WED7500GW
7.0 cu. ft Electric Dryer
WGD7500GW
7.0 cu. ft Gas Dryer